Amercoat quick reference. Flush all equipment with thinner or Amercoat 12 before use. Stir resin using an explosion-proof power mixer to disperse into a homogeneous mixture. Add cure to resin.
|Published (Last):||11 January 2007|
|PDF File Size:||11.71 Mb|
|ePub File Size:||12.80 Mb|
|Price:||Free* [*Free Regsitration Required]|
Amercoat quick reference. Flush all equipment with thinner or Amercoat 12 before use. Stir resin using an explosion-proof power mixer to disperse into a homogeneous mixture. Add cure to resin. Mix thoroughly until uniformly blended to aworkable consistency. Do not mix more material than can be used within the expected pot life, 1.
Higher material temperatures will shorten the pot life considerably. To minimize orange peel appearance, adjust conventional spray equipment to obtain adequate atomization at lowest air pressure. Apply awet coat in even, parallel passes with 50 percent overlap to avoid holidays, bare areas and pinholes. If required, cross spray at right angles. This will depend on the age of the primer, surface roughness and conditions during curing. Ventilate confined areas with clean air during application, between coats, and while curing the final coat.
Prevent moisture condensation on the surface between coats. Repair damaged areas by brush or spray. Clean equipment with thinner or Amercoat 12 immediately after use. Full Product Data Sheets Return to quick reference index. Return to C. Edwards Homepage.
*PPG SigmaCover 240 Formerly Amercoat 240
Universal epoxy coatings — superior edge retention and less stripe coating ppgpmc. Unless otherwise agreed upon in writing, all products and technical advice are subject to our terms of sale, available on our website ppgpmc. All rights reserved. Now you have a single product that is able to replace a series of specialized coatings with a one-coat application that can be used in a The Online Boating and Maritime Exhibition. Catalog excerpts Universal epoxy coatings — superior edge retention and less stripe coating ppgpmc. Open the catalog to page 2.
PPG AMERCOAT® 240 / PPG AMERCOAT 240 LT
AMERCOAT 240 / SIGMACOVER 240